Product range
PanTMT reinforcement steel
High-strength TMT bars manufactured with Thermex technology to IS:1786, available in 8mm to 32mm across Fe550, Fe500D, Fe550D and corrosion-resistant CRS grades.
Grades & products
Choose the right PanTMT product
Every grade is produced on the same controlled process line. Selection depends on load, exposure and design requirement.
Fe 550
High-strength TMT reinforcement bar produced with Thermex technology as per IS:1786.
Sizes: 8 MM · 10 MM · 12 MM · 16 MM · 20 MM · 25 MM · 32 MM
View technical detailsFe 500D
Ductile grade reinforcement bar for structures where higher elongation is specified.
Sizes: 8 MM · 10 MM · 12 MM · 16 MM · 20 MM · 25 MM · 32 MM
View technical detailsFe 550D
High-strength ductile grade combining strength with improved elongation.
Sizes: 8 MM · 10 MM · 12 MM · 16 MM · 20 MM · 25 MM · 32 MM
View technical detailsCRS Fe 550
Corrosion Resistant Steel bar with Ni, Cu, Cr and Mo additions for demanding environments.
Sizes: 8 MM · 10 MM · 12 MM · 16 MM · 20 MM · 25 MM · 32 MM
View technical detailsReady-to-use rectangular stirrups in 6x10, 6x12 and 6x14 sizes.
Sizes: 6x10 · 6x12 · 6x14
View technical detailsSectional weight
PanTMT sectional weight chart
Compare the PanTMT kg/m value against the BIS standard, minimum and maximum for each size before accepting any consignment.
| Size | Standard of BIS (kg/m) | Min (kg/m) | Max (kg/m) | PanTMT (kg/m) | Pcs of bar (nos.) | Bundle wt. (kg) |
|---|---|---|---|---|---|---|
| 8 MM | 0.395 | 0.367 | 0.422 | 0.385 | 18 | 83.2 |
| 10 MM | 0.617 | 0.574 | 0.660 | 0.580 | 12 | 83.5 |
| 12 MM | 0.888 | 0.844 | 1.659 | 0.860 | 8 | 82.6 |
| 16 MM | 1.580 | 1.501 | 1.659 | 1.560 | 4 | 74.90 |
| 20 MM | 2.470 | 2.395 | 2.544 | 2.450 | 3 | 88.2 |
| 25 MM | 3.850 | 3.734 | 3.965 | 3.840 | 1 | 46.1 |
| 32 MM | 6.310 | 6.120 | 6.499 | 6.300 | 1 | 75.6 |
Available sizes: 8 MM, 10 MM, 12 MM, 16 MM, 20 MM, 25 MM, 32 MM.
Comparison
Grade comparison chart
Typical values for conventional grades against PanTMT, as published in the PanTMT technical brochure.
| Property | Unit | Fe 415 | Fe 500 | Fe 550 | PanTMT |
|---|---|---|---|---|---|
| Yield Stress (YS) | N/mm² | 415 | 500 | 550 | 580 |
| Tensile Strength | N/mm² | 485 | 545 | 585 | 670 |
| Elongation Min | % | 14.5 | 12 | 10 | 18 |
| Carbon | % | 0.30 | 0.30 | 0.30 | 0.25 |
| Sulphur | % | 0.060 | 0.055 | 0.055 | 0.050 |
| Phosphorus | % | 0.060 | 0.055 | 0.050 | 0.050 |
| S+P | % | 0.110 | 0.105 | 0.100 | 0.100 |
| Total CRS (cr+ni+mo+p+cu) | % | — | 0.40 | 0.45 | 0.45 |
Need PanTMT for your project?
Get grade-wise availability and pricing
Share your size mix and tonnage. Our team will confirm availability, the nearest supply point and a current quotation.