Fe 500D
PanTMT Fe500D
Ductile grade reinforcement bar for structures where higher elongation is specified.
Available sizes
- 8 MM
- 10 MM
- 12 MM
- 16 MM
- 20 MM
- 25 MM
- 32 MM
Overview
About PanTMT Fe500D
PanTMT Fe500D is part of the PanTMT grade range (Fe 550 | Fe 500D | Fe 550D). Grade-specific test certificates are issued with dispatch; further published specifications will be added here by our technical team.
Technical specification
Sectional weight chart
Verify delivered weight per metre against the BIS minimum and maximum for each size.
| Size | Standard of BIS (kg/m) | Min (kg/m) | Max (kg/m) | PanTMT (kg/m) | Pcs of bar (nos.) | Bundle wt. (kg) |
|---|---|---|---|---|---|---|
| 8 MM | 0.395 | 0.367 | 0.422 | 0.385 | 18 | 83.2 |
| 10 MM | 0.617 | 0.574 | 0.660 | 0.580 | 12 | 83.5 |
| 12 MM | 0.888 | 0.844 | 1.659 | 0.860 | 8 | 82.6 |
| 16 MM | 1.580 | 1.501 | 1.659 | 1.560 | 4 | 74.90 |
| 20 MM | 2.470 | 2.395 | 2.544 | 2.450 | 3 | 88.2 |
| 25 MM | 3.850 | 3.734 | 3.965 | 3.840 | 1 | 46.1 |
| 32 MM | 6.310 | 6.120 | 6.499 | 6.300 | 1 | 75.6 |
Swipe the table sideways to see all columns.
Properties
Chemical & mechanical properties
Comparison of conventional grades against PanTMT, as published in the PanTMT technical brochure.
| Property | Unit | Fe 415 | Fe 500 | Fe 550 | PanTMT |
|---|---|---|---|---|---|
| Yield Stress (YS) | N/mm² | 415 | 500 | 550 | 580 |
| Tensile Strength | N/mm² | 485 | 545 | 585 | 670 |
| Elongation Min | % | 14.5 | 12 | 10 | 18 |
| Carbon | % | 0.30 | 0.30 | 0.30 | 0.25 |
| Sulphur | % | 0.060 | 0.055 | 0.055 | 0.050 |
| Phosphorus | % | 0.060 | 0.055 | 0.050 | 0.050 |
| S+P | % | 0.110 | 0.105 | 0.100 | 0.100 |
| Total CRS (cr+ni+mo+p+cu) | % | — | 0.40 | 0.45 | 0.45 |
Swipe the table sideways to see all columns.
Features
Product features
- Ductile D-grade
- Thermex technology
- Controlled chemistry
Benefits
Why engineers specify it
- Improved ductility
- Better bendability
- Suited to seismic design requirements
Applications
Where this product is used
- Residential construction
- Commercial construction
- Seismic zones
Manufacturing & quality
How this bar is produced
Every PanTMT bar passes the same controlled route from raw material testing to bundling and dispatch.
Stage 1
Raw Material Yard
- Raw material receive
- Raw material composition testing
- Raw material uploading (quality wise)
Stage 2
Furnace
- Charging of raw material (standard scrap recipe)
- Composition testing (every 30 min.)
- Maintain standard temperature
Stage 3
Casting
- Checking of temperature and composition of molten metal
- Casting start
- Water quality check (every 6 hours)
Stage 4
Rolling Mill
- Rolling process start, passed from Thermex
- Checking mechanical properties of rolled material every 15 min.
- Check weight of rolled material
Related
Other PanTMT products
Fe 550
PanTMT Fe550
High-strength TMT reinforcement bar produced with Thermex technology as per IS:1786.
View productFe 550D
PanTMT Fe550D
High-strength ductile grade combining strength with improved elongation.
View productCRS Fe 550
PanTMT CRS Sariya
Corrosion Resistant Steel bar with Ni, Cu, Cr and Mo additions for demanding environments.
View product